Tag: discount reloading supplies

Posted on by

Top 4 Reasons to Reload Instead of Buy

Lee reloading

There are two camps in the weapons and ammunition world: those who buy and those who reload. This may be on oversimplification to the uninitiated but the truth is, if you’re a serious gun owner you fall into one of these two categories. Bear in mind, one is not inherently better than the other and if you’re serious about gun safety and ownership then right away you’re on the right side of the fence.

There are plenty of reasons to buy instead of reloading. Maybe you don’t shoot as much or are nervous about doing-it-yourself. Fear not, because reloading can be easy, fun and fulfilling… and a heck of a lot easier on the wallet when you get right down to it.

So for those of you who aren’t reloading, here are the top 4 reasons to reload instead of buy!

4. It’s Cheaper

Your average 50-count of factory made 44 Magnum bullets will cost you around $35 a box. That’s not an insignificant amount of money. On the other hand, if you’re reloading that same kind of ammo and count, it’s going to cost you about $13; that’s a savings of $22!

3. You Can Shoot a Whole Lot More

Did you run out of bullets just as you were hitting your targets and now your local sporting goods store is already closed for the day? It’s happened to all of us, even those sportsmen with the best foresight.

But if you’re well stocked with reloading supplies, you’ll be hard pressed to run out of bullets again! Just reload and continue shooting!

2. Hit More of Your Targets

There are studies that have shown that hand reloading or using reloading supplies improves the accuracy of your weapon. Most of it comes down to bullet seating depth. Even if you buy the same caliber of the same brand, there can be massive variations in the chamber design. The cartridge may be designed to fit all chambers, but, upon firing, there will be a disparity in the distance between the rear end of the cartridge and precisely where the bullet engages the rifling after leaving the opening of the case.

This measurement can significantly differ within the official SAAMI caliber specification. Ammunition produced in a factory will no doubt be loaded to the shortest specification because this will allow the cartridge to chamber in all guns for that caliber without jamming into the action.

By reloading, you can create cartridges to the exact specifications of your weapon and improve firing accuracy across the board!

1. It’s a Heck of a Lot of Fun

The number one reason is that reloading your ammunition is just plain fun. It allows you to know your weapon better and mental stimulation, like reloading, can improve your brainpower, helping you stay sharper and more accurate for longer!

Don’t be a buyer for life, start with quality reloading supplies and start enjoying your weapon smarter, longer and more accurately! For further information or questions please contact Titan Reloading at 262-397-8819 or visit www.TitanReloading.com.

Posted on by

What are the Benefits of Reloading?

Reloading Safety Basics

Thousands of shooting enthusiasts across the globe have discovered the unique joy of reloading their own ammunition. Armed with the right reloading supplies and a bit of knowledge as to how to use them, you too can experience the satisfaction of reloading. If you’re new to the hobby, it’s worth taking some time to understand the big benefits that come with the reloading process. It’s about more than saving money.

Reliability
Put simply, hand reloading your ammunition gives you more control over your loads and more precision in your ammo. Manufacturer-loaded ammo is packed on an assembly line and while ammunition makers strive for accuracy and consistency, hand reloading is far superior. If you care about reliability and accuracy in your ammunition, hand loading is the only way to go.

Accountability
When you load your own ammunition, you know exactly what’s going on with the rounds you fire. There are no surprises. You’re accountable for your ammunition and its performance on the range, end of story. Taking control of the reloading process puts the responsibility for ammunition performance squarely in your hands, which is one huge reason reloaders enjoy the hobby so much.

Self-Reliance
Understanding how to reload your own ammunition and how to use reloading supplies correctly ensures that you never have to rely on a manufacturer for reliable, consistent rounds; hence, enables you to take control of your ammunition supplies and to keep reloading ammunition you like even if manufacturers make changes to their products that make you unhappy. There’s no better tool for the serious shooter than that of reloading.

Learning to reload is a challenging but rewarding process that gives you greater flexibility in your ammo choices and greater power over the performance of your rounds. Not only is reloading more cost-effective, it’s more rewarding and more fun than purchasing manufacturer ammo. For more information or inquiries please visit www.titanreloading.com or contact us at 262.244.7023.

Posted on by

Curious About Reloading Supplies? Stop By Our Workshop!

Reloading supplies

Like other hobbies, when you first get started with reloading you’ll find yourself overwhelmed with information. There’s vocabulary to learn, gear to buy, workflows to master, and tons of other details to understand before you can become a safe and efficient reloader. If you’re curious about getting started in the world of reloading but don’t know where to begin, consider attending one of Titan Reloading’s free reloading workshops.

Our workshops take place on the second Thursday of every month and start promptly at 7:00 p.m. in our showroom (660 Grand Ave., Hartford, WI 53027). The workshop is a great place to learn more about reloading supplies, processes, and efficient work habits. Veteran and rookie reloaders are all welcome; it’s important to us that we support the reloading community as a whole. We do prefer that attendees RSVP ahead of time so we know what size crowd to expect; or you can contact us to mark down your reservation. We do have limited space in the showroom but can accommodate small and medium groups as needed.

Reloading is a rewarding and sometimes challenging hobby with an infinite learning curve. There’s always something new to discover, whether it be a more efficient use of your reloading supplies, a different type of brass to pack, or a new method for reloading that gives you more accuracy in your shots. The more you talk to other reloaders and share your experiences, the better you’ll get at reloading. Our workshops are designed to be a tool through which reloaders can interact and share, building better habits and learning new things along the way.

Titan Reloading offers a wide range of reloading supplies and we’re happy to walk you through the basics if you’re considering taking your first steps into the world of reloaders. For more information  about reloading, our showroom, or our free reloading workshops, please visit www.TitanReloading.com or contact us at 262.244.7023.

Posted on by

A Note on Brass Etiquette

Brass

One of the best things about having a full stock of reloading equipment is that you’re free to reload your own ammunition at any time, saving money and taking greater control over the precision of your shots. But even with reloading equipment set up and ready, you need brass to start reloading. The brass you use is critical for your firing results; high quality brass with few firings will always work better than low end brass that’s been through the ringer.

Now, it’s true that collecting brass at a firing range is one way to increase your brass reserves without spending money. But it’s important to take into account some key bits of range etiquette before you start filling bags with spent rounds:

Observe Range Rules

Every firing range has different rules regarding the collection of spent brass. Some allow you to pick up brass fired by others, while some prefer you only collect your own brass. If you’re unsure about the rules at your particular range, ask an employee before you make assumptions. Always be respectful to your range, its employees, and your fellow shooters.

Stay Safe

Even if your range allows you to collect spent brass, you shouldn’t be wandering around collecting it while the range is hot. Collect brass at the end of the evening or when no one is actively shooting. Your collecting of brass should never create a safety hazard or inconvenience for the other shooters at the range. And don’t forget that brass is often hot!

Check Your Brass Later

Don’t waste time at the firing range inspecting every piece of brass you see. Collect the brass that looks good and wait until you’re home with your reloading equipment to check it out. Once again, your gathering of brass should never annoy or inconvenience the other shooters on the range; stopping to inspect every piece of brass could distract other shooters or cause other annoyances.

Titan Reloading is an industry leading supplier of reloading equipment. For more information about our brass collection or reloading please visit www.TitanReloading.com or contact us at 262.244.7023 with any questions. We also offer free monthly reloading clinics so be sure to check that out!

Posted on by

A Reloading Supplies Checklist for Beginners

Reloading Supplies

Getting into the world of reloading isn’t without its difficulty. There’s gear to acquire, vocabulary to learn, and processes to understand. Like any other hobby, there is a significant learning curve to reloading that must be conquered before you will feel comfortable, efficient, and competent. It takes time and effort.

At Titan Reloading, we love seeing new people learning how to reload their own ammo. That’s one reason we offer free monthly reloading workshops for anyone who wants to come by and learn. But there are many common questions we hear from new customers, and the most common is, “What reloading supplies / equipment do I need to start reloading on my own?”

We usually suggest the basic kit for starters consisting of a single-stage “O” press, a die for each caliber you intend to load, case lubricant for resizing, a priming tool (preferably one that allows for priming off-press), a scale for measuring charges, a powder thrower, a funnel for cleanliness, blocks for your ammo, and a caliper and trimming tool for measuring and trimming stretched shells. You’ll also need a funnel to keep your workspace clean (and to stop yourself from wasting or spilling powder), a deburring tool, and a primer pocket cleanser. And don’t forget your reloading manual, as this will ensure you’re following the correct procedure for optimum, safe results.

If you’re brand new to reloading supplies, that probably looks like quite a bit of equipment. But once you develop an understanding of how each component fits into the reloading workflow, you’ll see why it’s not possible to safely reload ammunition with anything less. Reloading supplies represent a large initial investment for more control over your ammo and more savings over time — don’t forget that reloading your own ammunition allows you to save up to 60 percent off the cost of factory ammo.

For more information about reloading supplies or our workshop please visit www.titanreloading.com or contact us at 262.244.7023 with any questions.